Installing rca line out converter

Provides amplifier remote turn-on output without removing the car stereo. Black wire connect to Ground. Red wire connect to the 12V battery positive. Blue wire connect to Control line REM. Easily mountable. Frequency Response: 10HzKHz. Remote Trigger Output: 12V. Locate the wires running from the head-unit or factory amplifier to the speakers. In most cases you'll access these wires behind the head unit.

Once you find the speaker wires, use the wire strippers to remove 1 inch of insulation from each one. Attach the left channel of the L. Solder the L. Secure the L. Plug in some RCA cables to the L. Adjust the amplifiers' gain levels to a medium setting. Turn on the stereo and adjust the volume to a comfortable listening level.

Posted on Monday, April 03, - GMT So which is better sound quality and how do I install either of them, I know the RCA converter has to be spliced into the wires in the back of the head unit, but how do I know which wire to hook it up too.

There's like twelve, I have a beetle is that helps. I do have to high input aswell and would like too know how to install that ,ause if its easier and I heard it was and not to different quality I will use that. Let me know what type of amp you are hooking it up to and I will help you out. Not difficult at all. But for better signal atrength I would use one if you already have it.